LED DIY lamp

A housing for an LED that can be used for a homemade lamp, or used on its own.List of materials:PLA plastic2 screws M2.6 x 82 screws M2.5 x 61 screw M6 x 8LED 3W 20mmHeatsink for LED 20x20 mmDriver for LED "LD1500SB"USB cable 3 mm or otherThermal pasteThe "input" part must be made of TPU.Make a thread M6 at one end of the radiator. LED holes may need to be trimmed. Connect EN and IN+ on driver board