LED light sign Frank

I made this model for a friends kid whose name is Frank as a gift. Printing is very straight forward. 0.16mm layer height and black/white PLA from sunlu with generic PLA settings is what I used. I tried different versions. Version 1: Battery light sources without back cover. You might want to increase the scaling in Z direction depending on how big your light sources are. I recommend using pucks like the one referred to in the material list.The pictures taken in the dark are of this “version” Version 2: Led strip light source with or without back cover. The LED Strip in the material list or equivalent should work. Just tape it on the inside behind the text. Use glue to mount the parts together if you're using the back cover. Just make sure to install the LED strip properly before gluing them together :) There is no pre drilled hole in either model for cable/hanging. Depending how and where you want to install the sign you might want to be able to adjust this yourself. I drilled the