LED-Mount for Wanhao duplicator i3

A simple LED-mount for the Wanhao duplicator i3, which allows you to keep track of your nozzle, while printing in a dark room or enclosure.

Check out our website for more cool stuff! HERE.

What you need:
- m3 x 8 or m3 x 10 screws (2x)
- m3 nuts (2x)
- a small LED strip with 3 LEDs U=12V (8 x 48 x 2mm) like this: https://www.amazon.de/Ecloud-Shop-Leiste-Streif-Wasserfest/dp/B00IXH5YG2
- a 3pin to 2x 3pin Y- adapter cable like this:
https://www.amazon.de/Neufteche®-Lüfter-Adapterkabel-Verteiler-Stecker/dp/B012FXNR9K
- another fan duct (rear mounted!) - I would recommend either
the cobra: http://www.thingiverse.com/thing:1090433
or this one: http://www.thingiverse.com/thing:1246425

Printing:
- print a rear mounted cooling duct and remove the stock one.
- print this mount (I used ABS (any other material should work fine as well) at 150 microns, 20% infill, 30mm/s printspeed, 10mm/s outerperimeter-speed to get a nice text-finish... sliced with craftware)

Installati