LED Strip Shop Light with Diffuser

LED shop light with diffuser. Print "led light diffuser v2.stl" in vase mode with transparent (or natural) filament with .3mm layer height, 1mm layer width, one base layer, one outer shell, no top layers, and no infill (like you're making a vase).

Here is the recipe:

2x light_ends.stl
8x rail_housing.stl
8x ring_insert.stl
4x led light diffuser v2.stl (you need 1000mm worth, so expand the z axis if you can print higher)
16x quarter rail for led shop light.stl

Instructions:

1. Super glue 4x quarter rails together end on end and make 4 rails that are 4 quarter rails long.
2. Assemble one side of the lamp as shown in the picture
3. Glue the diffuser pieces together so that it's 1 meter long
4. Slide the diffuser over the four rails
5. Assemble the other side of the lamp the same as the picture (same as step 2)
6. Connect to a 12v power supply
7. Optional: Splice in a power switch

I will have more pictures soon.