Thingiverse
Lee Loadmaster Case Feeder Height Spacer
von pastera
75
Downloads
33
Likes
0
Makes
Spacers to set the height of the case feeder - no more fiddling and guessing, just spin one on and mount the case feeder
These are a copy of a set I made from aluminum on my lathe.
The length of the spacers should be correct - if it needs to be tweaked leave a comment and I'll fix any issues
Print out at whatever layer height will reproduce 20 TPI thread profile on your printer with a decent wall thickness and infill to ensure strength. You may need to run a 1/4-20 tap through the threads if they're tight (I did when printing at 0.3mm) or adjust the print.
Yes, that is a custom printed case feeder in the picture. The feed hole is sized to fit 9mm, 380 and 223.
These are a copy of a set I made from aluminum on my lathe.
The length of the spacers should be correct - if it needs to be tweaked leave a comment and I'll fix any issues
Print out at whatever layer height will reproduce 20 TPI thread profile on your printer with a decent wall thickness and infill to ensure strength. You may need to run a 1/4-20 tap through the threads if they're tight (I did when printing at 0.3mm) or adjust the print.
Yes, that is a custom printed case feeder in the picture. The feed hole is sized to fit 9mm, 380 and 223.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
