Slicer Discord
Leeuwenhoek microscope – Modelo 3D imprimible de Thingiverse Thingiverse

Leeuwenhoek microscope

por HSB
15 Descargas
14 Likes
0 Makes
Ver Modelo
This is a small and simple pocket microscope. With an inexpensive 4mm lens it is possible to see things such as blood cells, epithelia cells and objects of that magnitude if properly prepared as in sets of basic science microscope slides.

This will require two adjustment screws with nuts and washers, also a lens and thread taps for the lens and screws. I used a M12x0.5 tap for the 4mm CCTV lens from ebay and 38mm, allen key M3 bolts for the adjustment screws. Double sets of lock nuts can be used as thumbscrews for adjusting the specimen holder. A little glue or loctite will help fasten the lock nuts.

The coupler block is threaded with a M3 tap so the position of the specimen holder can be adjusted. Some adjustment to the block using a file may be necessary for a snug fit.

Curtain clips can be used to fix specimen glasses to the holder. Different focal length lenses may give a variety of magnifications. The focal length of the lens may determine which way the specimen holder s
Fuente
Thingiverse
Lo que necesitas para imprimir: Intermedio Baja confianza
¿Por qué?
postproceso considerable
Pieza única Tornillería requerida
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 2/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
Postprocesado
Pegado, Tornillería
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección