Leg for 2020

Nice leg for 2020 extrusion. Add height and level adjustment. Tap extrusion deeply for M5. Use M5x14 socket head screw (Misumi, others). Rest of hardware from Home Depot. Glide leg is Everbilt SKU 193637. Coupling nut (near threaded rods) 1/4-20x7/8 is Everbilt SKU 822251.
Print round side down, 2 shells and 40% infill.

Note there are 2 thin shelves in the hole to aid the slicer in printing. They clean out easily.

https://youtu.be/d93sBPWYqKY

Put the screw in first and the nut is a press fit. The screw is tightened with an allen wrench through the nut. Works great. Could use a 1/4-20 jam nut to secure. Could use some rubber under the foot as well.