Thingiverse

Level 1 Rocket

by ryandgarrison

40 Downloads

17 Likes

0 Makes

These are parts I used on my Level 1 Certification rocket that flew on a Cesaroni H100 motor.

The nose cone is a 5:1 spherically blunted tangent ogive nose cone that fits a [T300-34](https://www.balsamachining.com/#) body tube. It prints in four pieces which can be glued together, sanded, and painted.

The tail cone doubles as a motor retainer and fits a [T38-34](https://www.balsamachining.com/#) 38 mm motor mount tube and has a notch modeled into it to allow for a rail lug to be placed at the bottom of the rocked body. There are two versions that work with a reloadable Cesaroni casing or a single use Aerotech.

aerotech motor boat tail cesaroni motor estes rocket level 1 certification level 1 rocket model rocket model rocketry model rockets nar nose cone rocket rocket ship tail cone tra aerotech motor boat tail cesaroni motor estes rocket level 1 certification level 1 rocket model rocket model rocketry model rockets nar nose cone rocket rocket ship tail cone tra aerotech motor boat tail cesaroni motor estes rocket level 1 certification level 1 rocket model rocket model rocketry model rockets nar nose cone rocket rocket ship tail cone tra

Source

Thingiverse

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format