LGA2011-3 CPU wall holder

Model Name: Simple CPU Wall Mount (LGA2011-3)Description:This is a straightforward wall-mounted holder designed for LGA2011-3 CPUs. The mount is fixed to the wall using two nails with a diameter of approximately 2.4 mm. Once installed, you can press the CPU into the holder until it is securely seated.Assembly Tips:Nail Size: The mount’s design accommodates two nails with a diameter of about 2.4 mm. Ensure that the nails are firmly anchored in the wall, leaving enough protrusion to fit the mount snugly.Fitting the CPU: Pressing the CPU into the holder may require some force. The tolerances are tight to ensure a secure fit.Adjusting Tolerances: If inserting the CPU feels too stiff, you can carefully apply heat to the inside of the mount (e.g., using a lighter) to slightly soften the material. This temporary flexibility makes it easier to push the CPU into place.Material Recommendations:PLA or PETG should be sufficient for basic use. If using a heat source to soften the mount, be cautious