Bobblehead figurine of a lich for your desk. In archives you will find both presupported and unsupported versions. Also, springs must be printed from rubber-like types of resin, and body parts after printing must be weighted down with heavy filler. Height is 12 cm
What you need to print this:IntermediateMedium confidence
Why?
supports needed · large print
Single pieceSupports required
Supports2/3
Assembly0/3
Settings1/3
Bed size2/3
Post-process0/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
200 mm (Large)
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Lich Bobble Head?
Any FDM printer should handle Lich Bobble Head just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.
Does Lich Bobble Head need supports when printing?
Yes, Lich Bobble Head will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
What file format is Lich Bobble Head available in?
Lich Bobble Head is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MyMiniFactory.
Is Lich Bobble Head free to download?
Yes, Lich Bobble Head is available as a free download through MyMiniFactory. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
Did you print this model? Sign in and share your make!
MyMiniFactory
