Lich King WoW Hueforge

Lich King WoW Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.1mm and the Actual Depth is 3.1mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.2 PLA PolyLite Dark Blue Transmission Distance: 0.1 PLA PolyLite Azure Blue Transmission Distance: 3.4 PLA PolyLite Aqua Blue Transmission Distance: 3.3 PLA PolyLite Polymaker Teal Transmission Distance: 0.8 PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 6 unique filaments***attached .3mf file prints the first 7 layers at 0.16mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions: Start with Black At layer #16 (1.36mm) swap to Dark Blue At layer #17 (1.44mm) swap to Azure Blue At layer #22 (1.84mm) swap to Aqua Blue At layer #27 (2.24mm) swap to Polymaker Tea