Lidl Glider Pitcheron Conversion

This is based on the following things:

- Lidl Glider 2022 wing adjustment by Karollo on Thingiverse: https://www.thingiverse.com/thing:5512884 (those wing adjustments are kind of flimsy compared to the ZiegeOne's but it'll do if printed with PETG)
- Lidl Glider 1806 Motor Mount (up to 2020) by gowen on Thingiverse: https://www.thingiverse.com/thing:3521854 (it only has one part - no good)

Motor mount now consists of two parts. Glue M2 nuts into the motor mount part 2, cut the nose using provided 2mm template and glue it to the glider. I'm using JMT 1806 2400KV motor

Folding prop hub 7x4 variant and I mount the blades with 0.5mm zinc coated steel wire. Use as many wire loops while it still fits into the hub's holes.

I've added (02.07.2023) a battery holder. A 3S 850mAh Tattu fits in there perfectly. Picture explains how to cut the fuselage

There should be some vent holes made in the canopy otherwise ESC will burn

I print everything with PETG and 100% infill