light channel for indirect light

This is a light channel I made to fill the gap between a cupboard and the wall with indirect light. The elements are 200 mm long, 75 mm wide, and 30 mm deep. The length of the parts can be scaled indefinitely. For the width and depth, I recommend a test print to see if the LED strip still fits.The groove for the LED strip is 15 mm wide, which should fit most strips. The mounting strip has 3 drill holes and can be cut to size in the slicer. It is slightly shorter than the channel so that an overlap is possible when mounting. For example, I only screwed on the strips in the middle with one screw. 2 spacers are included for screwing on the mounting strip. With the spacers, the light channel is flush at the end. However, please check whether the spacers are suitable for your purpose. Print the mounting strip and the spacers with standard values. The light channel should be printed upright. At least 3 walls and without a top layer, without a bottom layer, and without infill. If you are stil