Light Fury Eye

Had a request to have a Light Fury Eye to compliment Toothless Eye. I obliged. Light Fury EyePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size. Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (180max for A1 mini and 250max for P1/X1, this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Jade White Transmission Distance: 5 (Recommended Silk White to get that skin to shimmer)PLA BambuLab Basic Turquoise Transmission Distance: 3.8 ( or any light blue for the eyes)This print uses 3 unique filamen