Light-up your print i3 MEGA

The platform can be either used to just cover-up the under-part of the stock Extruder box, or like I did install self-adhesion LED-strips and wire them up. There is sufficient play to install little rubberrings to avoid vibrations from the fan.

The cable holes are designed to fit standart 1,27mm Pitch Dupont-cable.

The 4.8W LED-stripe I used is quite bright… I placed a 990ohm resistor on the + wire to reduce brightness and reflection on the print-bed.


Have fun building!!
Would appreciate some fotos of your builds =)