Lightbox FILAMENT Logo

Print settings: layer height 0.2 mm no brim no supports etc.Here you can download and assemble a lightbox with a filament logo (template by Balázs Szele). Please look at the pictures for explanation.You just have to print out the backplate and the cover. You can design the filament logo in the inlay with your desired color. The inlay is printed with the front side on the printing plate. For a nice effect on the surface, I recommend using a PEI plate.The inlay is then glued back into the cover in the frame and then placed on the backplate together with the cover.Use the .3mf file to print or download the files individually.I use LED strips in warm white for lighting.You'll get a nicer effect where the LEDs don't shine through as much if you print the inlay twice and stick it together. Then less light from the individual LEDs comes through the black, but that's a matter of taste.If you have any questions, please write to me and I will try to answer as quickly as possible.Otherwise I most