Thingiverse
Lighted Post Cap (Low Voltage)
von wakuhn
219
Downloads
153
Likes
2
Makes
Make your own illuminated deck post caps using this thing.
This lighted post cap is designed to work with low voltage (typically 5 or 12 VDC) wired power. Print the 4 parts, add LED strip lighting, wire, and connector to complete the project.
The bottom is sized to fit on a square post that is 4.5 - 4.75 inches across (e.g., a 4x4 wrapped in 1/2" trim boards). For other post sizes the STLs may be scaled, or you may edit the FreeCAD file.
More detailed instructions below.
This lighted post cap is designed to work with low voltage (typically 5 or 12 VDC) wired power. Print the 4 parts, add LED strip lighting, wire, and connector to complete the project.
The bottom is sized to fit on a square post that is 4.5 - 4.75 inches across (e.g., a 4x4 wrapped in 1/2" trim boards). For other post sizes the STLs may be scaled, or you may edit the FreeCAD file.
More detailed instructions below.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
