Lightening

Project: Sky 3 tiles.hfp Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm  The Model is 200x196.88mm in size  You may print at higher layer heights below the Base Thickness of 0.6mm  The Max allowed Thickness is 3mm and the Actual Thickness is 3mm #000000 PLA AnyCubic HS Black Transmission Distance: 0.2 #5d0013 PLA AnyCubic Red Transmission Distance: 6.7 #c86853 PLA Elegoo Orange Transmission Distance: 5.3 #ffffff PLA AnyCubic HS White Transmission Distance: 2.6 This print uses 4 unique filaments Swap Instructions: Start with HS Black At layer #8 (1.08mm) swap to Red At layer #14 (1.8mm) swap to Orange At layer #18 (2.28mm) swap to HS White for the rest.