Lightest Gridfinity Base Ever - Customizable

TLDRThese use half the filament and print much faster compared to normal baseplates. A 4x4 in just 14 minutes of print time! Drop down the “Open in Bambu Studio” button and click “Download STL/CAD File” to download the pre-made sizes. Or use the “Customize” button to make your own. 0.8 nozzle recommended for ultra fast prints but 0.4 or any nozzle is great also. What's Different?I made this from scratch to make it parametric and ultra light. Here's why this prints faster and with less filament:Skeletonized the entire base so only walls are printedOverhangs between grids removedBottom lip removed (Doesn't effect functionality)Small sliver of the top removed (Doesn't effect functionality) Nozzles and Print Settings0.8 nozzles are recommended since you can print these with just 1 wall, as the base is 0.8 thick. But any nozzle works. Every other setting not listed below is fine on default.0.8 Nozzle: - 14min of model print time for a 4x4!Walls: 1Layer Height:0.32mm recommen