Lightning in a bottle Hueforge

Project: lightning in the bottle.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Paramount 3D British Racing Green Transmission Distance: 3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyLite White Transmission Distance: 5 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to British Racing Green At layer #12 (1.04mm) swap to Blue Gray At layer #13 (1.12mm) swap to Marine Blue At layer #16 (1.36mm) swap to Sunrise Orange At layer #18 (1.52mm) swap to White At layer #21 (1.76mm) swap to Savannah Yellow for the rest.