Like Tears In Rain

Resize to what you want, but don't change the Z axis. Project: Tears in rain.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x264.64mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ Sunlu Sky Blue Transmission Distance: 2.5 PLA+ Sunlu White Transmission Distance: 2.4This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Sky Blue At layer #19 (1.6mm) swap to White for the rest.