Linear Actuator large

This is an actuator designed for use with a motion simulator. With the 1610 ballscrew @24 volts and the recommended motor this actuator should be capable of unloaded speeds in excess of 900mm per second. It is meant for use with the

Ampflow e30-150 motor http://ampflow.com/three_inch_high_performance_motors.htm

1605/1610 x550 ballscrew https://www.ebay.com/sch/i.html?_odkw=ballscrew+1605&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xballscrew+1605+550.TRS1&_nkw=ballscrew+1605+550&_sacat=0

BK12 bearing https://www.ebay.com/sch/i.html?_odkw=ballscrew+1605+550&_osacat=0&_from=R40&_trksid=p2045573.m570.l1311.R1.TR3.TRC1.A0.H0.Xbk12.TRS0&_nkw=bk12+bf12&_sacat=0

Two pieces of 20x60x500 vslot extruded aluminum from openbuilds http://openbuildspartstore.com/v-slot-20x60-linear-rail/

The linear bearing is from IGUS part #GFL-25 https://www.igus.com/product/?artnr=GFL-25

the shaft coupler is 30x42 with 10mm x 12.7 mm bore

The carrier assembly for use with t