Link (Zelda) HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 2.3mm and the Actual Depth is 1.3mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Dark Gray Transmission Distance: 1.8PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #6 (0.6mm) swap to Dark GrayAt layer #7 (0.68mm) swap to GrayAt layer #10 (0.92mm) swap to Jade White for the rest.