Linkle with crossbows

I wanted a Linkle figurine, but the one that I found I wasn't thrilled with, so I created this one. The prints shown were made with a Core One in PLA and the settings below at 150mm height (100% model size). The filaments used were Flashforge Bronze PLA, Polymaker's Panchroma Ying-Yang Dual, and Overture's Green-Blue Silk PLA.Settings Checklist (The Golden Profile)For successful printing, I used these settings (PrusaSlicer):Orientation: Leaning backwards 45'. This worked best for the bow strings, and reduced layer lines on the front of the print.Layer Height: 0.15mm fixed. Nozzle: 0.4mm.Perimeters: 3 (Conditions the model for easier support removal without snapping appendages).Infill: 10% Gyroid (Isotropic strength with no nozzle-crossing collisions).Supports: Organic Style (enable "Structural" branches), Everywhere. This reduces vibrations on tall, thin supports, and Everywhere supports Linkle's belt and compass.XY Separation: 80%.Top Contact Z Distance: 0.