Thingiverse
Fashion
Go to Model
Lipstick holder
146
Downloads
121
Likes
1
Makes
My girlfriend needed somewhere to put her lipstick so here it is!
The diameter of various different lipsticks for the most part is 17 mm, 18 mm, and 19 mm so I went with 20 mm.
Enjoy!
IG: https://www.instagram.com/vancity.exe/
Update 09/04/2017: Added LipstickholderV6SharpTopEdge.stl Which has the top edges more aligned with the look of the whole design.
09/09/2017: Added LipstickholderV6SharpTopEdge-ThinnerWall.stl that has thinner inner walls for faster print and less use of filament. Also the inner squares have increased in size so should measure out to around 21 mm x 21 mm.
09/25/2017: Added 22mmLipstickholder-SharpTopEdge-ThinnerWall.stl which has all 22mm slots for bigger lipsticks. Holds 36.
The diameter of various different lipsticks for the most part is 17 mm, 18 mm, and 19 mm so I went with 20 mm.
Enjoy!
IG: https://www.instagram.com/vancity.exe/
Update 09/04/2017: Added LipstickholderV6SharpTopEdge.stl Which has the top edges more aligned with the look of the whole design.
09/09/2017: Added LipstickholderV6SharpTopEdge-ThinnerWall.stl that has thinner inner walls for faster print and less use of filament. Also the inner squares have increased in size so should measure out to around 21 mm x 21 mm.
09/25/2017: Added 22mmLipstickholder-SharpTopEdge-ThinnerWall.stl which has all 22mm slots for bigger lipsticks. Holds 36.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
