Thingiverse
Lite3DP Spacer
por Zuke2675
3
Descargas
0
Likes
0
Makes
If you're like me - and I honestly don't think you are - the Lite3DP-S1 was your first and only 3D printer. I've had a few issues getting the exposure right, but ultimately, the best solution (as provided by Maker_JoLam on the Discord channel) is to increase the spacing between the circuit board and the base. The kit comes with 35mm plastic spacers; a distance of 50mm works much better. I wasn't willing to wait for ordered spacers, so I just modeled these and printed them myself.
The holes are a little tight, and you'll have to use the 3mm screws with the kit to cut the threads. Don't overtighten them, or you'll strip them right out.
The STL file is a single leg; you'll need 4 (obviously). I've also included my Chitubox file which spaces all 4 legs in one print on the Lite3DP.
The holes are a little tight, and you'll have to use the 3mm screws with the kit to cut the threads. Don't overtighten them, or you'll strip them right out.
The STL file is a single leg; you'll need 4 (obviously). I've also included my Chitubox file which spaces all 4 legs in one print on the Lite3DP.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
