Litho LED Backlight frame

I´ve created a frame for Lithophane pictures and the use of the originalBambulab LED Backlight Board (see links). This time I used it for a Halloween-Pumpkin Lithophane.It is made for Lithophane pictures with the dimensions 154x118x3mm. There is a part for the backside, where you can insert the LED Backlight Board andscrew it with 4x BT2.6x8 SHCS Self Tapping Screws. (2 screws would probably be enough) The Lithophane will be inserted into the Front-part and can be secured also with 4x BT2.6x8 SHCS Self Tapping Screws. Inside the Lithophane profile I also added a second print plate with a very thin (1 Layer) greydimmer plate. It can be put between the Lithophane and the LED Backlight Board, if you feelthe light´s too bright. For the assembly please also check out all the pictures. PS: You don´t need to add a Lithophane picture. I tried it also with normal photos and it looked quitenice with the backlight as well.Boost MeThanks