Lithophane Holder 150mm

This is a complete re-design of a lithophane holder I saw earlier on Youtube or here on Thingiverse. But this was for a small lithophane only and I needed a bigger one. Since nobody was able to share the design files with me so I could change the dimensions and add improvements, I decided to design my own. And here it is.... Lithophane settings using LithoPhaneMaker.com (100% square image is essential!) Frame Option: Framed Lithophane Resolution: 0.3 Lithophane Height: 150 Angle: 90 Frame Width: 5 Frame Height: 5 Overhang Angle: 45 Maximum Thickness: 3.6 Minimum Thickness: 0.6 Picture Spacing: 10 Preferred PLA: eSun PLA+ Cool White. Printer settings for best results: Layer Height: 0.1mm, Speed: 45-60 mm/s, 6 walls, 99% infill (not 100%). Electronics needed: standard 12V stuff you can get from Banggood, Wish, Aliexpress, Amazon, etc. Shopping list (please CHECK if you have the right one/size as they change quite often): 12V Adaptor: https://nl.banggood.com/LUSTREON-AC100-240V-TO-DC12V-2