Thingiverse
Lithophane Lamp (everything screwable)
di ReTeDe
17
Download
15
Likes
0
Makes
At this Lithophane's structure everything is screwable. No glue needed. So the Lithophanes can get replaced any time.
The structure is made for panels size 130x130x3mm. To get a tolerance I designed it for 131x131x3.5mm.
For the lamp I used a G9 LED (lamp shouldn't get hot if you use PLA).
The holes are closed with one layer, to make it printable without support material. Open the holes with a screwdriver or something pointy.
I suggest to print cap 2 upside down.
I used this materials:
+) 2x M2x20mm screws
+) 4x M2x12mm screws
+) 6x M2 Nuts
+) G9 Lamp holder (https://www.amazon.de/gp/product/B00P65F040/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1)
+) cable with switch (https://www.amazon.de/gp/product/B002DAOX58/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)
+) G9 LED (https://www.amazon.de/gp/product/B0861C1HWH/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1)
The structure is made for panels size 130x130x3mm. To get a tolerance I designed it for 131x131x3.5mm.
For the lamp I used a G9 LED (lamp shouldn't get hot if you use PLA).
The holes are closed with one layer, to make it printable without support material. Open the holes with a screwdriver or something pointy.
I suggest to print cap 2 upside down.
I used this materials:
+) 2x M2x20mm screws
+) 4x M2x12mm screws
+) 6x M2 Nuts
+) G9 Lamp holder (https://www.amazon.de/gp/product/B00P65F040/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1)
+) cable with switch (https://www.amazon.de/gp/product/B002DAOX58/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)
+) G9 LED (https://www.amazon.de/gp/product/B0861C1HWH/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1)
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
