Lithophane Lamp

This model can hold 2 100x70mm and 1 100x60mm lithophane. Unfortunately, this design still has a few problems that I want to fix in the future.I used WS2812B LED and an Arduino nano. If you have any questions, ask them in the comments.I used this website to create the lithophane https://tool.itslitho.com/CreateModel.You have to select Border as the Frame.Building guide:what you need:Version 1: Arduino Nano 6 led strips with 5 leds 1 button 6x6x4.5mm jumper cable 6 screwsVersion 2: Arduino Nano 6 led strips with 5 leds 1 button 6x6x4.5mm jumper cable 4 round 5x1mm magnetsVersion 1 is way easier to build.also use the cover pictures to get a better idea.Step 1: 3x connect 5V to 5V, Din to Dout and GND to GNDwatch the arrowv on the LED strip.Step 2:3x connect 1 female jumper cable t 5V, Din and GNDStep 3:take one of the led stips , and connect male jumper cables as shown in the picture.Step 4:Take the butten and connect female jumper cabels to it, as shown in the picture.Step 5: now you ca