Lithophane Lightbox

**UPDATED 1/26/2022 - I added more instructional pictures, diagrams, and notes.

Lightbox I made for fun and to waste two weeks of nonstop printing and two spools of filament.
Three different tops to choose from; top half of Earth, *flat circle, or five-pane style.
Three different carousels to choose from (four, six, or eight lithophanes per level) in any combination and as many levels as desired.
There are 2 bases to choose from, one with the motor I used, the other for no motor.
*The file "000_Use_To_Cut_Do_Not_Print" is for cutting the circular top file generated by the lithophane website.

https://3dp.rocks/lithophane/

I used Microsoft's 3D BUILDER to cut that file.
I used Cura and its "fuzzy skin" on the base.
The square lithophanes are 78x78x3 mm
The rectangular lithophanes are 160x78x3 mm
The circular lid is 214mm in diameter
3 Template images are included, just put your image inside of the black border.

UPDATE 9/16/2024
File "000_Top_Globe" reduced from 74M