Thingiverse
Lithophone
by Faraa
32
Downloads
29
Likes
0
Makes
Litophone is the effect that occurs when viewing an image on a lumen. When the light in the lamp turns on, the image becomes quite clear.
The windows for the llama of lithophone can be made in the program "jpg2stl" https://3dprint54.ru/download/nastroika-programmy-jpg2stl.rar or http://www.it-aspect.ru/lithophane/index.html
Size of window 3x100x110 mm
The body I printed with 20% filling and a layer of 0.3 mm. The windows are printed with 100% filling and a 0.2 mm layer.
The top and the base are connected with screws M3x10. The chuck is fixed with screws M4x10. Use only LED lamps.
The luminaire can be used as a simple lamp. The windows for a simple lamp should be printed with a filling of 15 ... 20%.
The windows for the llama of lithophone can be made in the program "jpg2stl" https://3dprint54.ru/download/nastroika-programmy-jpg2stl.rar or http://www.it-aspect.ru/lithophane/index.html
Size of window 3x100x110 mm
The body I printed with 20% filling and a layer of 0.3 mm. The windows are printed with 100% filling and a 0.2 mm layer.
The top and the base are connected with screws M3x10. The chuck is fixed with screws M4x10. Use only LED lamps.
The luminaire can be used as a simple lamp. The windows for a simple lamp should be printed with a filling of 15 ... 20%.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!