Little Backup Box, Raspberry Pi 5 case, version 2

This is a case for a Raspberry Pi 5 with an active cooler and a 0.96 inch OLED display and the Power Expansion Board (GeeekPi). I designed it to use with the program "Little Backup Box" (github, outdoorbits). You can find more information on my website: https://www.thelightdecides.com/travel-photography-blog/little-backup-box-simple-reliable-backup/#nossd and on the [github page from outdoorbits](https://github.com/outdoorbits/little-backup-box).

The housing consists of 5 parts:

* bottom part
* middle part
* upper part
* display cover
* little button for the power button

What you need to assemble the housing:

* 4 screws M2.5x25 mm
* 3 screws M2.5x4 mm
* 7 threaded insert nuts for 3D printing M2.5x3.5x4 mm
* information about display, cables and other hardware can be found on my website

As it is a 3D print, please do not overtighten the screws.



My Print Settings
* Ankermake M5c
* GreenTec Pro Filament
* Layer high 0.2 mm
* First layer high 0.2 mm
* 4 wall loops
* Middle part wit