Thingiverse
Little Hexacopter
von hybridkunst
15
Downloads
14
Likes
0
Makes
The same rules as for the Qadrocopter, using 6 motors and ESCs.
Carbon rods are 8mm and 2mm.
The take off weight including a 2S 1000mAh battery is 460g. The flight time is 8 minutes. I think there is room for improvement.
The rods and the ABS-parts are clued together using acetone.
Please see the ASM.stl for the fully mounted Hexacopter. You need to place some dampers in between the main frame and the center part. The mass of the battery stabilizes the flight controller, cause they are mounted hard to each other, while the connection to the frame is softer.
Feel free to ask questions.
Carbon rods are 8mm and 2mm.
The take off weight including a 2S 1000mAh battery is 460g. The flight time is 8 minutes. I think there is room for improvement.
The rods and the ABS-parts are clued together using acetone.
Please see the ASM.stl for the fully mounted Hexacopter. You need to place some dampers in between the main frame and the center part. The mass of the battery stabilizes the flight controller, cause they are mounted hard to each other, while the connection to the frame is softer.
Feel free to ask questions.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!