Live Action Chopper Head Bounce

This mod is for Live Action Chopper from Asoka.
There is a basic instructions PDF attached. You will need to download there chopper files from Mr Baddeley's Patron page.

You will need to orient the files for printing. Parts like the servo mount, the main
Lifter parts that attach to the lazy Susan I recommend 6 walls and 25% infill.
I used PETG for all my parts.
You can print Jeanne’s Neck gear cover that’s on the one drive
for her head bounce Or use my split version with the extra detail ring in the files, you will need to print her ring gear.
I have added Topring 2 and 5 to the files as these have been modified for the head bounce.
The upper body ring will need to have the head tilt fittings removed using a dremel.
It’s Important to cut the screws for the front lifter frame so there flush before gluing it to
the body.
Now there is a tricky part, you are going to have to drill and tap the 8mm metal rod
To screw an M5 Rod End Bearing in.