LM2596 Display Stepdown case

Stepdown case
Case made for LM2596 Buck converter with display using terminal blocks connection with openable lid for easy operating with module using two M3x12 to M3x20 screws. It's attached to the printer by two M4 (or M3) screws and T hammer nuts. There is a spacer for using different lenghth of screws. Buck converter is attached by two M3 screws.
Assembly

- Attach Lid to Body by M3 screws.
- Mount M4 screws and T nuts to Body.
- Attach the case to the printer and insert Isolation. This step is optional - it prevents from short circuit, but it's designed to not happen (don't know if every module is the same...but should be).
- Insert LM2596 into the case, attach it by M3 screws using Spacer x2. M3x10 is best, but you can scale Spacer in Z axis for longer or shorter ones.
- If you have longer screws than M4x6, use Profile spacer and scale it by your need. It's 1mm height, so if you need 2mm, scale it by 200% in Z axis...



Stepdown pouzdro
Pouzdro navrženo pro