Loc-Line GoPro Camera Mount

Some additional Loc-Line fittings to attach a GoPro to some Loc-Line. Parts that link directly into the Loc-Line should probably be printed in ABS or annealed to prevent splitting.

The clamp extension is intended to friction fit to the Loc-Line, but came out a bit loose. For the short-term I've used a couple rounds of masking tape to get it to fit as desired. It extends the end of the clamp used so that it can attach to a coffee table with a rounded corner.

This is very loosely based on Adam Savage's camera rig, but more tailored to my specific usage.
https://www.youtube.com/watch?v=7tFwHXpxNLY&list=LL&index=5


2021-02-13: V2
I found that if you mount a camera particularly high and off center the post on the base clamp had a tendency to break off, especially if you're using a lower amount of infill. I modified it to be two pieced with a bolt attaching them to make it much more study. I also added an extension that friction fits to the base to give it some more height w