Lock Pick 9 in 1 Multitool

This model is much weaker than its metal counterpart and deforms easily. Please use with caution on smaller locks only. Choose 9 attachments to print and assemble this multitool.Print Lower, Upper, 2 Nuts, and 9 spacers.The nut is hard to screw on with hand, use a tool if possible.Print threaded parts in high-quality settings. (i used 0.16mm layer height)Print with part solid. About 5 walls or do 100% infillThe spacer is small, ARACHNE wall generator worked for this partUse stiffer materials such as PLA, PLA-CF. ABS or PETG are more flexible, which is bad for printed lock picks.Assembly Instruction:Place a 1mm thick tool on one end of the first rodPlace a spacer (1mm thick too) on the end of the second rodRepeat until 9 tools and 9 spacers are used upPlace Upper part on and screw nut if needed (The lid can be press fitted without nut) Boost Me Check out Lock Picks, Rake, and Notch Decoder too:https://makerworld.com/en/models/871283#profileId-823277https://makerworld.com/en/models/88482