Locker Shelf system

If you have a small locker and need to be able to organize it to maximize the space this could be the system your looking for. I've spent some time creating this to make it work well and be sturdy. If you work in a food production facility you have locker clean outs and this will allow you to remove it with ease for cleaning and reinstalling later. This system measures a hair under 14 ¾ in ( 14 23/64 in ) wide by 9 5/16 in deep. The main shelf measures 13 inches to the top of the shelf, with 12 inches of clearance under it for steel toe boots. There is some gluing required with this. Then you have several flat sections you bring in and snap them together. The rest is designed to be removable after if you have to take it out. You will print all the build plates once to have enough parts to assemble this shelf system. Build plate 4 is the walls. It's marked to print 4x (times). This will give you the 12 inches of clearance for boots. You will notice on these side panels you will