Logitech C270 camera mount for Sidewinder X1

I designed this Logitech C270 camera mount for my Sidewinder X1 printer.

PLEASE NOTE: My design can only be used if you are NOT using the USB and SD slots on the left side of the printer. I have modded my printer and no longer use either of those slots.

You will need (2) M4x30 screws and the appropriate washers and nuts (I used nylon lock nuts) to join the top and bottom brackets. You will need (3) M4x25 screws to mount the camera arm to the brackets.

I also used (3) M4 brass threaded heated inserts in the top and bottom brackets but I have included files for brackets that have smaller holes, so you don't have to use brass inserts if you don't want to. https://www.amazon.com/gp/product/B07LBQGZ6F/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

You also need (2) M3x30 screws, (1) M3x15 screw, and the appropriate washers and nuts to connect the top swivel pieces.

I mounted a C270 camera that had a manual focus ring mod. you can find it here: https://www.thingiverse.com/th