Logitech C920 HD Pro Wall Mount

This is a mount for the Logitech C920 HD Pro webcam that allows you to mount it to a wall. The camera can be easily rotated. Aside from the screws needed to fix it to a wall no other hardware is needed. The holes for the screws are 5mm wide. There are two parts, the solid part that is screwed to the wall which is intended to be printed in something solid like PLA, PETG or whatever. The part that connects to the camera is designed to be printed with TPU 95A or softer as the case has to flex a little to push-fit the camera into the mount. It will not fall out and as it is a very good fit, it will not work with harder plastics. The two separate model parts are easily connected by hooking the camera mount into the hole and rotating it to snap into place. You will need to squeeze the sides of the mount a little to insert the camera, and pull the side with the bump a bit when you want to remove it. This was made by scanning the mount point of the C920 and reverse engineering it in ExModel, a