Thingiverse
Logitech C920 Webcam Mount
von AlanWarrick
24
Downloads
12
Likes
0
Makes
This is a simple Logitech C920 Mount box i designed for my own use for mounting to an aluminum extruded frame, with this it is assumed that you have removed the stand attached to the main body. This is for the lighter weight and lower profile.
UPDATE 4/13/18 : Rev2.1 [Body: Strengthened ball connector, Mount: repositioned and widened mount holes as i found them to be too narrow]
Cameras that should also fit:
C922 Pro Stream
Logi Pro Ultra wide angle
I have only printed the first prototype (pictured)
Here is the video i used to take the camera apart:
https://goo.gl/6sTq6u
Webcams with the following dimensions should also fit in the mount:
Width..................94 mm
Depth\Length......24 mm
Height..................29mm
UPDATE 4/13/18 : Rev2.1 [Body: Strengthened ball connector, Mount: repositioned and widened mount holes as i found them to be too narrow]
Cameras that should also fit:
C922 Pro Stream
Logi Pro Ultra wide angle
I have only printed the first prototype (pictured)
Here is the video i used to take the camera apart:
https://goo.gl/6sTq6u
Webcams with the following dimensions should also fit in the mount:
Width..................94 mm
Depth\Length......24 mm
Height..................29mm
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
