Slicer Discord
Logitech G25 Encoder Wheel Repair Ring – 3D-printbaar model van Thingiverse Thingiverse

Logitech G25 Encoder Wheel Repair Ring

door MakerHX
4 Downloads
6 Likes
1 Makes
Model downloaden
Your Logitech G25 steering wheel has calibration problems ?
Does your G25 steering wheel suffer from a cracked encoder wheel ?
(You know, this 60 slot black tiny encoder disc mounted at the back of the motor.)

You can go for one of that metal solutions, but that comes at some cost and only after a loooong shipping wait.
If you are a little unpatient like me, than you might want to use this simple ring, slipped over the extension on one side of the wheel.

This solution works perfectly and leaves no room for improvement !
It is basically the same as the "washer" solution you find on the web, but without drilling and filing a washer to the correct size.

What to do ?
From the parts provided, choose the one with the tightest fit.
(printing all parts takes about 6 Minutes with my printer, 5.3mm worked best for me)

Use a drop of superglue and tighly push the ring onto the extension until the very end. Pushing it down on a level surface ensures that the slotted disk is perfec
Bron
Thingiverse
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Min. bedgrootte
50 mm (Klein)
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie