Logitech G25 G27 Sequential Shifter Reshell

Sequential Reshell for Logitech G25/G27 shifters, I remixed from two other files to use as a dedicated sequential shifter and retain the button functionality. I shortened the top riser to obviate the need for an extension on the lever itself, as I prefer the short throw as is. To assemble you will need two springs and a M4x35mm screw and self locking nut, 12 M4x10mm screws, 6 M4x20mm screws as well as a dozen 4x6x6mm brass threaded inserts, plus a bit of glue - I recommend Weld-On #16. Helpful notes from the original file on Thingiverse:Disassembly:To get started you want to unscrew the hold down clamps, by removing the Nut on the bottom of both clamps.Than you want to fully unscrew the clamps until you can take out the actual clamping part.Be sure to keep all the Original Parts somewhere where you don't lose them just in case you want to sell your shifter later.Now you want to take of the cap on top of the shifter to reveal the screw that holds down the knob.After you removed the