Logitech Powerplay alternative dock

Listed as Remix, but designed from the ground up using Ashiraki's desing as a guide.
I reproduced the design in OpenSCAD and left a bit more space for the original cable. I also added some wider feet in the style of said cable to make it more stable.

Required equipement: soldering iron, 2 screws (not exactly sure of the size, put them as best I could below), female micro USB B and female USB A boards, about 10-15cm of wire.

Recommended: multimeter to check connections.

screw dimensions:
head diameter: 5mm
length: 7mm or more, mine are 12mm
screw inner diam: ~2mm

I used https://www.amazon.ca/gp/product/B07VH4PSTF/
and https://www.amazon.ca/gp/product/B07KS1RPMP/

For this desing, you will need to make your own female micro USB B to female USB A and pass wires to screws in the plate. It's designed to fit the original cable with the Y shape and has a space for the receiver. it uses the magnetic contacts at the bottom of the mouse to recharge it while not in use, simpl