MakerWorld

Decor

long dragon

by Max.gordoncoconut · Decor

1.1k Downloads

145 Likes

443 Makes

Go to Model

it is very long takes around 4 hours to print but looks great

Category

Decor

Source

MakerWorld

Published

26.02.2025

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

4 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does long dragon need supports when printing?

Yes, long dragon will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print long dragon?

According to the design notes, long dragon takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is long dragon available in?

long dragon is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is long dragon free to download?

Yes, long dragon is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

long dragon

Similar Models

Add to Collection