Looney Tunes Pool

I print with all fans off except the extruder fan. Also I used Arachne instead of classic but profile wouldn't load with Arachne. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x280.7mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA PolyLite Natural Transmission Distance: 21PLA+ Sunlu Grey Transmission Distance: 2PLA Bambu Lab White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to NaturalAt layer #15 (1.28mm) swap to GreyAt layer #16 (1.36mm) swap to NaturalAt layer #19 (1.6mm) swap to White for the rest.