Lotus Lamp – 3D printable model from MakerWorld

MakerWorld

Decor

Lotus Lamp

by Chris Bobo · Decor

235 Downloads

205 Likes

0 Makes

Go to Model

There are multiple configurations you can use the Lotus Lamp. You can print a single lotus and leave it on a flat surface, or you can combine it with one of the four stands included. One to four lotus bottoms and rings will need to be printed for each stand. One led holder will need to be printed for each lotus. I had a bit of an issue with the nozzle running into the print while printing the lotus, so I highly suggest using z-hop when printing the lotus. Each lotus, led holder, ring, and lotus bottom were printed with a .2mm layer height and 5% infill. Each stand was printed with a .2mm layer height and 10% infill. No supports are needed. The lights that were used in the photos are mini submersible multi-color led tealight candles. You can find them on Amazon. You can also use standard led tealights. Happy printing (^-^).

decoration light lamp led flower decor lights leds lighting lamps home lampshade ledholder ledlight decorations lampbase homedecor ledlamp decorative lotusflower

Category

Decor

Source

MakerWorld

Published

29.10.2024

Updated

30.04.2026

What you need to print this: Beginner

Why?

no supports · 2 colors · 0.20mm layers

Support-free Single piece 2 colors / AMS

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Colors

2 (AMS/MMU recommended)

Layer height

0.2 mm

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Lotus Lamp?

Any FDM printer should handle Lotus Lamp just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Lotus Lamp need supports when printing?

No supports needed for Lotus Lamp — it's designed to print clean off the bed.

Is Lotus Lamp beginner-friendly?

Yes — Lotus Lamp is a solid beginner print. Nothing tricky going on here, good choice if you're just getting started.

What file format is Lotus Lamp available in?

Lotus Lamp is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Lotus Lamp free to download?

Yes, Lotus Lamp is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL