Low Profile Microphone Arm

This is a low-profile microphone arm that swivels underneath a monitor to save space. I've been using this for over 3 months, and it's been rock-solid.Boost MeFully 3D printed with no supports! All printed hardware can be swapped with M10 x 30mm bolts and M10 nuts.Clamps onto 35mm diameter poles (e.g. Ergotron or Amazon Basics monitor arms). If you don't have an existing pole, model files for a pole are provided.Included mounts for Audio Technica AT2020 microphones, ⅝"-27 threads, and ⅜"-16 threads.Magnetic cable management channel with 4mm x 2mm magnets (24 magnets required).STEP files available for purchase on Printables.InstructionsMaterial: PETG/ABS recommended. PLA is acceptable, but creeps/deforms under constant loads more than other materials.Wall loops: 5. The arm needs to be very rigid.Infill: 15% Gyroid. Fill Multiline: 2. Nuts and bolts should be printed solid with 100% infill.Layer height: 0.20mm.Line width: 0.60mm recommended. Thicker line widths improv