Low Profile SnapLock Box (Customizable/Parametric)

This is my take on the classic SnapLock box, designed from the ground up with an emphasis on being low profile and thin. Minimum thickness: 20mm (outside thickness) Tolerances were designed with PETG in mind, although I have confirmed it works in PLA as well.Customizable (Using Fusion or Makerworld Customizer)Don't see the size you want in the provided .3mf file? No problem, you can open the customizer and input your desired desired dimensions. Customizable options:x_width: Outside total width of the box - To get inside dimension add 2*wall_thicknessy_length: Outside total length of the box - To get inside dimension add 2*wall_thickness+15.7lid_height: Height of the lidbottom_height: Height of the bottom part of the boxwall_thickness: Thickness of the walls. 3mm works great across most sizes, but options are from 2-5mm. Printing (Standard .2mm profile, NO SUPPORTS)PETG recommend for long term durability and ease of assembly. With that said PLA works as well. Latches should be print